ModelleAlle Spannweiten

SNIPE 2/2 EL - Electro - Flügel 2teilig (1490mm)

Lager: Lager
CHF 645.00

Beschreibung

Snipe 2/2 Electric

Extrem kompaktes Modell zum problemlosen Transport.
Der Flügel entsprichte 1:1 Snipe 2.
So ist der Snipe 2 EL auch als F3K Modell mit Handlaunch einsetzbar.
Bei der geteilten Fläche (2/2) undbeding rechts- oder linkshänder angeben.


Extremely
portable Snipe 2/2 El allows you to bring the model with you anywhere. The box dimensions for the single model is just 810x190x70 mm.

Wing fitting construction adds 5 gr. only to the model weight.

High-strength joiner and the unique wing joint design ensures the integrity of the glider at launch with full power. Autoclave molding secures high durability of the wing joiner which is made of high-tech carbon prepreg.

Snipe 2/2 El has the additional pin around which the aileron horn rotates. The pin is mounted along the aileron hinge axis. This pin eliminates the vertical movement of the aileron and prevents the flutter. 

We make two-part wing Snipe 2/2 El for both right- and left-handers. Consider it before ordering. 

Be sure to tape the wing joint on both sides before the flight!

Andere Flügelversionen auch möglich (bei der Bestellung angeben)

Preise für andere Flügelversionen:
Regular = - 20.- 
2/2, Light UHM, Strong, UHM = gleicher Preis
2/2 Light UHM, 2/2 Strong, 2/2 UHM = + 30.-

Length

 1032 mm (40.6 inch)

Wing span

1496 mm (58.9 inch)

Wing area

19.65 dm²  (304.6 sq in)

Wing airfoils

Proprietary airfloil family by Joe Wurtz

Wing aspect ratio

11,3

Horizontal stabilizer area

2,14 sq dm (33.17 sq in)

Horizontal stabilizer airfoils

Proprietary airfloil family by Joe Wurtz

Horizontal stabilizer aspect ratio

1,42

Vertical stabilizer area

1,47 sq dm (22.78 sq in)

Vertical Stabilizer airfoils

Proprietary airfloil family by Joe Wurtz

Control surfaces

Ailerons (flaps), rudder, elevator